Every tuner tells you the note. On a pedal steel, the note was never the
question.
Steel Tuner tunes each string to the chord your pedals and knee levers are
actually making — so the chord rings instead of wobbling.
A chromatic tuner wants every string at 0 cents. But press the A pedal and
your B strings become the third of an A chord, and a third tuned to 0 cents
beats about four times a second against the root. That's the restlessness you
hear. Steel Tuner works out where each string should sit for the chord you're
playing, and moves every target the moment your foot moves.
WHAT YOU GET
• Targets that follow your feet. Press a pedal or lever and all ten strings
are re-aimed for the new chord.
• Honest about the strings that can't be fixed. On E9, strings 1, 4 and 7 are
asked to be two different notes in different chords. Steel Tuner tells you
which ones, shows what each compromise costs, and gives the stop-screw
adjustment for the seven that can be fixed.
• Watch the note settle. Two and a half seconds of pitch history show a string
arriving sharp and settling, instead of a needle that jumps around.
• Not stuck on whole-Hz steps. The notes this instrument cares about fall
between the settings of a 440/441 tuner — a 1 Hz step is almost 4 cents.
• Built on real charts. Starts from the published Emmons chart, and marks
every number as measured or calculated so you always know which is which.
• Your guitar, your setup. Every string, pedal, lever and half stop is
editable — even mid-tune, with the bar in your hand. Share your setup with
another player as a single file.
• Cabinet drop kept separate, so you're never chasing two problems at once.
NECKS
E9, C6 and U-12 universal, plus C6 and E13 lap steel and open G resonator.
PRIVATE BY DESIGN
Everything happens on your phone. No account, no ads, no tracking — nothing
is recorded or sent.
Built with a working steel player, against published charts.
